Capacitive Touch Sensing

Introduction: Capacitive Touch Sensing

In this video we will be looking at using a PIC micro that has the capacitive touch sensing module on board.  This will be the PIC16f727 chip.  These are part of the mTouch series of PIC micro's that Microchip has come out with.  I talk in this video about some cad software that you can download a free trial for and also some flux pens that kester has.  I have included two links below for these two things.  Please check them out.


Kester Solder Fux Pens
http://www.kester.com/SideMenu/Products/HandSolderingMaterials/FluxPens/tabid/263/Default.aspx

CadSoft's eagle CAD
http://www.cadsoft.de/

Be the First to Share

    Recommendations

    • Make it Real Student Design Challenge #3

      Make it Real Student Design Challenge #3
    • Toys & Games Contest

      Toys & Games Contest
    • Barbecue Speed Challenge

      Barbecue Speed Challenge

    2 Comments

    0
    Dazbea
    Dazbea

    5 years ago

    Hi, thanks heaps for the tutorial.
    Do you know if I would be able to connect sensor pads in a matrix style connection for 36 pads using a 3x12 matrix?

    0
    Dazbea
    Dazbea

    Reply 5 years ago

    Nevermind, I found a data sheet that explains you can. Thanks anyway.