Introduction: Carbon Fiber / Wood Skateboards
These two skate boards were done differently. The first one (bunny board) was placed in a home made steamer and vice to warp and add concave to the board. Than 2 layers of carbon fiber was placed on the wood once it was completely dry. After the epoxy was dried I sanded the board down and added the design.
Step 1: Ph822 Logo Board
This board was plied on a vice with a concave shape and then cut and sanded for shape. I than applied 2 layers of carbon fiber and the design on the bottom was 100% original.
Step 2: Grip Tape
Grip tape was purchased on eBay. One was clear and the other is black.