Carbon Steel Shirasaya Straight Tanto-ish Machete With Hardwood Handle
Intro: Carbon Steel Shirasaya Straight Tanto-ish Machete With Hardwood Handle
Heya guys! This is my Shirasaya Straight Bladed Tanto-ish machete. I'm really proud of this one, I can honestly say that this is one of my better works so far.
I made the blade using a carbon steel plate I bought at a steel shop. I cut it to shape, smooth out any rough, uneven parts using an angle grinder, put an edge on the steel, and heat treat the steel in my charcoal forge. Its very tough, durable, and hard to break. The tip, in particular, is very tough and durable because I spent a lot of time in heat treating it. The handle was made out of teak hardwood, bolted together.
Enjoy!
I made the blade using a carbon steel plate I bought at a steel shop. I cut it to shape, smooth out any rough, uneven parts using an angle grinder, put an edge on the steel, and heat treat the steel in my charcoal forge. Its very tough, durable, and hard to break. The tip, in particular, is very tough and durable because I spent a lot of time in heat treating it. The handle was made out of teak hardwood, bolted together.
Enjoy!
46 Comments
Muscelz 14 years ago
The Metal One 12 years ago
Camisado 14 years ago
Muscelz 14 years ago
Muscelz 14 years ago
Portalman 13 years ago
average joe 1999 13 years ago
An Villain 14 years ago
Camisado 14 years ago
An Villain 14 years ago
Camisado 14 years ago
An Villain 14 years ago
Camisado 14 years ago
An Villain 14 years ago
Camisado 14 years ago
An Villain 14 years ago
crack_shot_556 14 years ago
Camisado 14 years ago
Freerunner 14 years ago
Camisado 14 years ago