Charcoal Camping BBQ (lightweight, Portable, Foldable)




Introduction: Charcoal Camping BBQ (lightweight, Portable, Foldable)

How to built a DIY Camping BBQ using recycled materials.

Unmounted very compact and portable

No soldering required, only a cutting tool and tolls for folding pieces of the iron sheets

Step 1: Camping BBQ: Blueprint


- 4x steel plates (35cm X 28cm)

- grid for the bottom: to contain the charcoal

- steel wire and rods

I used 4xMetal separator of a Ikea shelves and an old BBQ grid for the bottom (to contain the charcoal)

Step 2: Resulting Pieces

... I know, I know... the cuts must be done better.. but this is only the first Prototype ;-)

And I need a better tool :-)

Step 3: Assemble All Together

fit the 4x folded triangle inside the slots

Please note that in this prototype are not cutted+folded the 4xsupports for the cooking grill

Step 4: Charcoal Grid Details

Please note the rotating legs that will be fitted inside the 4x holes

Step 5: Charcoal Grid Mounted

using 4xHoles and grid rotating legs

Step 6: Unmonted and Piled All Together

Lets go to camping!!!

Camping Food Challenge

Runner Up in the
Camping Food Challenge

Outside Contest

Participated in the
Outside Contest

Be the First to Share


    • Metal Contest

      Metal Contest
    • Make it Move Challenge

      Make it Move Challenge
    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest


    spark master
    spark master

    6 years ago

    Sweet, good for the car, canoe or redoubt for zombie invasions bug out hideaway!


    7 years ago

    Great design! Just a suggestion: Could use a shot of the actual assembly--how to fit the sides fit together. I had to do a close-up to see the little bent tabs. I love this idea. I suppose one could probably attach a small movable flap over the holes in order to adjust the airflow & slow down the coals' burn rate?


    7 years ago

    Wonder if someone really made this :D