Introduction: Cigar AshTray (3D Print)
Welcome. This is my first posted Instructables so forgive me for how poorly it is laid out. I hope everyone enjoys this design while they smoke a delicious cigar of their choice. Enjoy!
Step 1: Download & Save
Download & Save file
Step 2: Open in 3D Printing Software and Set Parameters (I Used Cura)
Open in software and position tray correctly. I highly suggest printing from the bottom up, as this will minimize supports.
I used PLA but I would love to see how it works using different materials.
I added words to the top extruded into the material, but it did not come out well. Just poorly placed. (Thanks Creo).
Used a print pad and this was very hard to get off. Heated plate up to 90C and pried it up. It was stuck.
This design holds every size cigar perfect. Perfect for those Churchill's.
