Control Arduino With Visual Studio Via Bluetooth

hi everyone ,

here we will control one led via bluetooth using your pc by a progam wirtten with visual studio

what you need is :

1)Arduino (any one)

2) Bluetooth Module (hc05 or hc 06)

3) led

4) 2 resistors (10ko and 15ko)

and u can do it ;)

all codes will be available :)

Step 1: Schematic

Comments

[bruserker]

Hi there!
I've tried to test your C# code that was provided here, however whenever I load the .sln project file to my Visual Studio and click twice on the Form1.cs project file, VS generates the following error message:
Cannot find the file
'C:\Users\bruno\Desktop\v.b+arduino\vi\Form1.cs'. It may have been moved or deleted.
Do you have any idea about what could be the possible problem here or if I am actually doing something wrong?
Thanks in advance,
Bruno.

[abedo74]

Would you please show us the C# code?

[YeahM2]

Hi.Everything works.But the receive text box is not showing the sentences Like"Ok,OFF"....Can you help me with that ?

[VedaV1]

bro unable to give wireless input from the c#.net application

and unable to find COM11 port

[YongB1]

Am i able to use a wifi shield instead?

[alain19]

Bonjour et merci pour ce super tuto !

Je n'arrive pas ou ouvrir le code sur visual studio est-il possible d'avoir votre code utilisé ?

J'aimerai faire la même chose mais en vb.net en m'inspirant de votre test.

Vous remerciant par avance,

Très cordialement,

[JardaP]

Why i can't open arduino code? :/

[Ahm3d]

int ledPin= 13;

char c ;

void setup()

{

Serial.begin(9600); // initialisation de la connexion série (avec le module bluetooth)

pinMode(ledPin, OUTPUT); // fixe la pin "ledpin" en sortie

}

void loop() {

char c = Serial.read();

switch (c) {

case '1': // si arduino reçois le chiffre 1 alors

digitalWrite(ledPin, HIGH); // allume sur la broche "ledpin"

Serial.println("ok,on");

break;

case '2': // si arduino reçois le chiffre 2 alors

Serial.println("ok,off");

digitalWrite(ledPin, LOW); // eteins la led sur la broche "ledpin"

break;

case '3': // si arduino reçois le chiffre 3 alors clignote

Serial.println("ok,clig");

while(c=='3'){

digitalWrite(ledPin, HIGH);

delay(500);

digitalWrite(ledPin,LOW);

delay(500);}

case '4' :

Serial.println("ok,timer");

digitalWrite(ledPin, HIGH);

delay(5000);

digitalWrite(ledPin,LOW);

}

}

[JardaP]

Thank You :)

[MsSweetSatisfaction]

Awesome gadget! Welcome to instructables!

[Ahm3d]

Thank you :) :)