Convert Your Jigsaw Into a Bench-top Saw Using an Old Computer Desk

Intro: Convert Your Jigsaw Into a Bench-top Saw Using an Old Computer Desk

I used those instructables as model:

https://www.instructables.com/id/Convert-your-Jigsa...

https://www.instructables.com/id/Jigsaw-to-Scroll-S...

STEP 1: Tools

Old computer desk

Eye protection

Dremel

Hammer

Chisel

Measuring tape

Bolts and nuts

Pencil

Jigsaw

Drill

STEP 2: Holes in the Jigsaw Base

Disassemble the jigsaw base

Drill the holes

STEP 3: Marking the Computer Desk

Use a pencil to mark the position of the jigsaw base and the holes in the computer desk

STEP 4: Holes in the Computer Desk

Use the machine drill to make the roles

STEP 5: The Hole for the Saw

Use the dremel to cut the hole

STEP 6: Digging the Table

Use the chisel to dig the hole for the jigsaw base

STEP 7: Assembling

I used and worked

Comments

[sumtonian]

Excellant work really tempting and inspiring !

Thank You

[seamster]

Thanks for sharing your version of this project. Looks useful!

[faustopenello]

Thanks, it's very usefull but i will need to make some improvements.