Cooking Toys for Kid

Introduction: Cooking Toys for Kid

Things you need:

1 USB switch

1 Arduino bread board

3 red led

1 light register

10 jumper wires

4 registers

Things you want to do with decoration

Step 1: Build the Wire

look out the pictures, its more easier to understand with it!!

First: connect the "5V" and the "Gnd" on to the bread board.

Second: connect the red led's positive electrode on "D13" "D12" and "D11", than connect every single led's negative electrode with the registers.

Third: Connect the light register with 1 register to the negative electrode and connect it to "A0" with a wire, and connect a wire to positive electrode.

Step 2: Coding

https://create.arduino.cc/editor/Royeeeee/b70b0940-9092-473d-a7bd-5187d1fd725e/preview

Step 3: DECORATE

Cover up what you just made with anything want, but remember to let the light register stay at the top so it can detect the light.

have fun

Be the First to Share

    Recommendations

    • Back to School: Student Design Challenge

      Back to School: Student Design Challenge
    • 3D Printed Student Design Challenge

      3D Printed Student Design Challenge
    • Organization Contest

      Organization Contest

    Comments