DIY 9V Battery Clip

by razvan_iycdi

21K9227

Intro: DIY 9V Battery Clip

Hi, people!

In this instruct able I will show you how to make a 9 volt battery clip out of... a 9V battery :)... and some wire.
So, let's get started, shall we?

25 Comments

Peregrine05 5 years ago

Don't take apart the rechargeable! That would be a HUGE waste!:)

kaveh2 8 years ago

very useful and creative. thanks man.

MaxF5 8 years ago

you can get 2 things, 9 batteries and the clip thanks for that

filip74321 9 years ago

really nice project definetively one of my top 10's becouse i can always use a coyple of 9v clips :) thanks for posting this

primeq 11 years ago

great inventive idea

cobourgdave 11 years ago

Nice instructable and quite inventive. I will retrieve a few of the 9 volt'ers from the hazardous waste can. I can always use a few battery clips. Excellent!

joshmt2012 11 years ago

Instead of cutting the case apart you can just fold apart the top edges like i did in mine, that way you are able to save the case for an enclosure for other projects. nice post tho, i like all the pictures

batman96 11 years ago

Those "AAA" batteries that are in those, are not quite as long as a AAA, and the polarities are backwards, the little bump, is the negative side.

razvan_iycdi 11 years ago

Yeah. they are "AAAA" (quadruple-A). Thanks for noticing ;)

batman96 11 years ago

I was just wondering if you actually ever tried putting them in your tv remote.
They are shorter, you have to use some tin foil to make it work, and the polarity is backwards from normal the little nub is negative.

razvan_iycdi 11 years ago

Yes. They are good for emergencies.

gzaloprgm 11 years ago

The mechanical stress moving the wires will cause eventual fails. Maybe embedding the connector in hot glue can solve it...

mho1970 11 years ago

5 minute epoxy. Just a dab will do ya.

batonas 11 years ago

did the same thing a while ago, I used heat shrink to cover it up.

razvan_iycdi 11 years ago

nice idea. I didn't have any shrink wrap tho.
More Comments