Introduction: DIY CD Dragon Sculpture
There you have some instructions to make a CD dragon sculpture!
You are going to need :
- few meters of wire
- some old newspapers
- about 15 CDs
- some plastic
Step 1: Step : 1 : Making the Skeleton
Use any wire you want make a skeleton.
Step 2: Step : 2 : Making the Body
Take a piece of crumpled newspapers and add it to the wire. Then wrap strip of newspapers dipped in a glue around. Continue til the whole dragon is covered with newspapers. Then let it dry.
Step 3: Step : 3 : Making and Adding Scales
Make scales from about 15 old CDs. The longer and thinner, the better because there will be less space between. Now start gluing the scales using hot glue. Begin from the bottom and continue upwards. Then add some details like eyes, horns, thorns and so on.
Step 4: Step : 4 : Making Wings
Cup a piece of plastic and using the hot air gun bend it to "U" shape. Glue it to the wire and add scales.
Step 5: Some Photos :
There are some photos of my dragon and the dragon I made before. Enjoy !
1 Person Made This Project!
- dragons11 made it!