Introduction: DIY Glowing Fountain

About: FUN DIY, CRAFTS, EXPERIENCE THE JOY OF DOING IT YOURSELF. OFFICIAL CHANNEL.

Glow your room this winter with a beautiful Glowing Fountain.

Rustickraft presents a homemade DIY Glowing Waterfall Fountain using the Acrylic sheet and Popsicle sticks.

Materials Needed:

Tools Needed:

  • Soldering Iron
  • Scissor
  • Hot Glue
  • Super Glue

Step 1: Popsicle Box

So Let's Start...

  • Let's gather some popsicle sticks.
  • Cut the top and bottom edge of the sticks.
  • Join the sticks with super glue to make a square box shape.
  • Make 3 different shapes. (as shown in the imgs)

Watch the full video on YouTube and don't forget to SUBSCRIBE and SHARE.

https://www.youtube.com/watch?v=LbefqX3qhFU

Step 2: Building the Fountain

We need a Polyester Film.

  • Cover the square boxes with the films.
  • Now we need 3 different square size Acrylic Sheet.
  • Make a hole with a soldering iron at the middle of the 3 sheets.

Step 3: Light Holder

Let's take a PVC pipe

  • Make a hole at the bottom of the PVC.(as shown in the imgs)
  • Take a bulb holder.
  • And place the PVC on the holder.

Step 4: Connection of Lights and Pump

  • Now wrap LED strip on the PVC.
  • Then take a Water Pump.
  • Join a small piece of Aquarium pipe with the Water Pump.
  • Then fix the pump on the hole of PVC.
  • Connect a 12V Adapter with the pump and the LED.

Step 5: Assembling

Now take a Fountain Planter.

  • Place the bigger square box on the planter.
  • Place the PVC on the middle of the square box.
  • Then place the bigger Acrylic sheet.
  • Then follow the steps with the other boxes and sheets. (as shown in the imgs)
  • Draw lines on the sheets with hot glue.

Step 6: Final Shot

Finally, the fountain is ready.

  • Fill the planter with water.
  • Switch on the LED and the pump.

Enjoy the beautiful Glowing Fountain.

Watch the full video on YouTube and don't forget to SUBSCRIBE and SHARE.

https://www.youtube.com/watch?v=LbefqX3qhFU