Lego IPod Dock
Intro: Lego IPod Dock
This is a simple Lego iPod dock that you can build in a single afternoon. It is very simple to make. Oh, and by the way this is my first instructable, so I hope you like it!
STEP 1: Gather Pieces
1. 1 16x8 plate
2. 4 8x2s
3. 8 3x2s
4. 12 2x2s
5. 8 6x2s
6. 5 4x2s
7. 2 1x2s
8. 2 1x4s
9. 2 1x6s
10. 2 1x1s
2. 4 8x2s
3. 8 3x2s
4. 12 2x2s
5. 8 6x2s
6. 5 4x2s
7. 2 1x2s
8. 2 1x4s
9. 2 1x6s
10. 2 1x1s
STEP 2: Main Body
Stack 4 2x6s on top of each other, and place on board as shown. Build two walls around the piece that you just made as shown.
STEP 3: Another Wall!
Build the wall as shown in the pictures
STEP 4: Building the Cord Holder
stack the 2x2 pieces on top of each other as shown. Then place a 2x2, and a 1x1 on top of them as shown.
STEP 5: USB Cord
Put the USB charger across the two Lego pieces as shown. Then secure the cord down with Lego pieces.
STEP 6: Finish the Back Wall
Finish covering the back wall with Lego's as shown.
STEP 7: Bulid the Corners
Build the corners around the USB plug as shown.
STEP 8: Testing 1, 2, 3.
Plug in your iPod and your done!
STEP 9: OPTIONAL
These steps are optional they are just for decoration.
STEP 10:
1. 6 clear 1x1 slanted pieces
2. 6 1x2s
2. 6 1x2s
STEP 11: Putting It All Together
Put it all together as shown.
STEP 12: Second Test
So NOW you can plug your iPod in, and enjoy!
STEP 13: Enjoy!
Enjoy your new iPod dock!
18 Comments
TRAVIStheAWESOME123 11 years ago
Spikeyhairdude 12 years ago
I rate this a DEFINANT 5 STARS!!! THANX iApple guy
iApple guy 12 years ago
Spikeyhairdude 12 years ago
iApple guy 12 years ago
Spikeyhairdude 12 years ago
VAViking 12 years ago
iApple guy 12 years ago
hmfoster 12 years ago
iApple guy 12 years ago
iApple guy 12 years ago
hmfoster 12 years ago
iApple guy 12 years ago
thewizzard 12 years ago
iApple guy 12 years ago
kucherf 12 years ago
I added a speaker on each side to the lego structure and it looks and sound fantastic!
iApple guy 12 years ago
iApple guy 12 years ago