Introduction: DIY PCH Land Paddle - Street Paddle From a Kit
This is my store in Etsy.com. Please pass by.
DIY PCH Land Paddle Kit for Longboards Skateboards
Aloha!
I'm Dan the land paddle man and I'm so glad you stopped by.
Thank you for your interest in the PCH Land Paddle Kit
If you want to make your own Street or Land Paddle, this is the way to go.
EASY TO MAKE. Only 3 TOOLS needed: Saw, Screw Driver and Glue
● PCH Land Paddle Kit includes:
Bottom Piece of the PCH Paddle is a fiberglass tube and 2 solid rubber discs with nut and bolt and metal pin.
Wood Handle top piece.
Dowel ring sawing guide.
● What you will need:
1-1/4" diameter (3.175 cm) x 72" (185 cm) long wood dowel
Glue: Gorilla Glue or 2 part epoxy.
Screw Driver, Saw, Sandpaper, Tape and Pencil.
✦ ✧ ✦ ✧ ✦ Disclaimer ✦ ✧ ✦ ✧ ✦
Making and Using the PCH Land Paddle can be dangerous!
Make it and use it at your own risk.
Please be Safe.