Introduction: DIY | Smartphone (Bluetooth) Controlled Robot Arm Using Arduino | HC-05
Every robot is incomplete with Robotic Arm.
In this video we are going to make a Simple Robotic Arm which you can replicate easily. So seat back and Enjoy the journey.
In future If you make your Robotic Arm ,Please share your experience with us too.
Step 1: Watch the Video
Step 2: Collect Required Parts
Part Used: (amazon.in)
Robot Arm Kit : https://amzn.to/3tHxWU9
Arduino Nano : https://amzn.to/3hjb4Yj
HC-05 Bluetooth Module : https://amzn.to/3hjb4Yj
MG90S servo motors : https://amzn.to/3hjb4Yj
SG90s servo motor : https://amzn.to/3hjb4Yj
General purpose PCB : https://amzn.to/3hjb4Yj
Power Bank : https://amzn.to/3hjb4Yj
20 mm berg strips : I bought this from local electronics shop
Scotch Tape : https://amzn.to/3hjb4Yj
Tools Required:
Soldering Iron : https://amzn.to/3o4emjm
Iron I used : https://amzn.to/3o4emjm
Step 3: Download the Code and Files and Test the Servo Motors
Test the servo motors using provide test code.
Attachments
Step 4: Build the Robotic Arm by Using Provide Document
Step 5: Build the Circuit Using Schematic
Step 6: Upload the Code and Download the Bluetooth App Using Link and You Are Ready to Go
Bluetooth Link:
https://play.google.com/store/apps/details?id=appi...
or
try this drive link
