DIY Homeade Nerf Airsoft Gun

Intro: DIY Homeade Nerf Airsoft Gun

This DIY tells you how to make a airsoft gun out of a nerf gun, darts, tape, scissors, and airsoft BBs!! This is for you if you want to play airsoft but you only have nerf guns or if you want to make you freind a gun!!! This is a awesome mod that leaves bruises on you !!!!
DISCLAIMER: MAKE NO MISTAKE, THIS IS A WEAPON. DO NOT SHOOT AT ANYTHING FRAGIAL OR ANYONE. IF ANY PROBLEM OR DESTRUCTION IS CAUSED BY THIS, I CLAIM NO RESPONSIBILITY...................................................'

***** I MADE THIS FOR MY 8YR OLD BRO! I MADE IT TO NOT SHOOT BBs EXTREMELY FAR !! I MADE IT TO SHOOT IN THE HOUSE SAFELY.... AND ITS ALSO LITTLE BRO SAFE CONSIDERING IT DONT HURT!! I USED THESE MATERIALS BECAUSE THESE ARE ALL I HAD (I DIDNT HAVE A BIC PEN OR ANY OTHER KIND OF PEN THAT A BB COULD FIT IN) !!!

SO STOP GIVING ME JUNK COMMENTS!!!

STEP 1: WHAT YOU NEED!

You will need a.....

- at least 1 NERF gun
- at least 1 NERF dart or stefans
- scissors
- tape
- Airsoft BBs

STEP 2: CUT the Darts

'Now take the darts
and cut the tips off
so it looks like a tube
with a hole through it !!'

STEP 3: Barrell Time!!

Now its time for the barrell
to be wrapped in tape
just enough so it fits into
the barrell tightly not loosly!'

STEP 4: LOAD THE GUN and Use It !!

To load it put the ammo down the barrell and pull back the cocking mechinism....... aim........... FFFF IIIIIIIIII RRRRRRR EEEEEEE !!!!'

***** I MADE THIS FOR MY 8YR OLD BRO! I MADE IT TO NOT SHOOT BBs EXTREMELY FAR !! I MADE IT TO SHOOT IN THE HOUSE SAFELY.... AND ITS ALSO LITTLE BRO SAFE CONSIDERING IT DONT HURT!! I USED THESE MATERIALS BECAUSE THESE ARE ALL I HAD (I DIDNT HAVE A BIC PEN OR ANY OTHER KIND OF PEN THAT A BB COULD FIT IN) !!!

SO STOP GIVING ME JUNK COMMENTS!!!

STEP 5: !!!!!!!!

everyone no i have solved the problem of shooting not far !!!!

its the air restrictor! find were it is in you nerf gun and remove it once its removed and it still shoots air out the front now go back and do step 3 again!

sorry for the inconveneice!!

and please dont hurass me for this thing being weak i know but this is an inside gun one you can shoot this inside without hurt anything too much.'

Comments

[bobitybob06]

bed gremmar lol

[Capt. Kidd]

ummmmmmmmm... i would not make this, because i have done it before, and does not hurt!!!!

[The1andonlyDaniel]

Check my comment, (3 comments above)

[nerfkid427]

My nerf airsoft gun hurts pretty bad if not modded but if it is modded, it hurts. take a look.

[Raiden97]

if you really want to hurt people then buy those guns that shoot those really small bbs, and its not airsoft!

[The1andonlyDaniel]

By the way, for all the people who want to make their nerf airsoft stronger, like 250 ft. range, just listen to these instructions.....

1. Get your dart and stick a straw in it. Once you've done that, trim the straw to desired amount.

2. Stick the dart that you made and put it in the firing chamber of the nerf gun and secure it with duct tape.

3. Stick the bb in the modified dart and pull the mechanism to fire it,

DISCLAIMER: I am NOT responsible for any injuries or deaths that occur because of your careless mistakes.

[DaddysGal22]

Love it!!!

[Capt. Kidd]

mhm. why would anyone shoot foxes????? T_T i love foxes.

[dontkillpenguins]

mine can kill a fox w a head shot

[SonicX 22]

i have 2 questions:

1. Can i use a gun like the Nerf Recon CS-6?

2. Do i have to do Step 5 first and then do Step 3?

[Raiden97]

yeah i said "metal ones, and theyre smaller than 6 mm bb's"

[Raiden97]

im talking about the ones that shoot metal ones, and theyre smaller than regular 6 mm bb's

[Capt. Kidd]

Ive got one. I would know.

[Prestonage]

I made one that shoots at about 450-550 FPS and I've never seen its max distance. But it can also shoot over 15 BB's in one shot at over 200 FPS.

[cranberys]

HOW DO YOU TAKE OUT HE AIR RSRICTOR

[alex4646]

you have to unscrew it.then you just look up : air restrictor removal on instructables/youtube. youll figure it out in notime

[cranberys]

thanks\

[Apple_4_life]

 look it up on instructables, or even youtube

[alex4646]

fragial? i know what you mean but still....

[Apple_4_life]

 nice job dude, I'm gonna try it when I get my hands on some BBs.