DIYwasp Trap

2,234

12

1

Introduction: DIYwasp Trap

About: enjoy arduino,inventing,diy's and technology check out my ebay at-https://www.ebay.com.au/usr/kalebshow2s?_trksid=p2047675.l2559 website- https://kalebshow2s.weebly.com

This is a fun project to keep the wasps away
For this project you will:
-old milk bottle or lemonade bottle
-sugar
-tape
-water

Step 1: Step 1

You need to cut the bottle in half roughly from a third of the bottle from the cap

Step 2:

Step 3: Step 3

Now mix about 5 tea spoons of sugar into some water and put in to the bottle and put it outside to catch wasps.
If you liked this instructables vote,favourite and subscribe also visit my website and eBay page for any spare parts.
eBay- https://www.ebay.com.au/sch/jodhamman/m.html?_nkw=&_armrs=1&_ipg=&_from=
Website - http://kalebshow2s.weebly.com

Be the First to Share

    Recommendations

    • Plywood Challenge

      Plywood Challenge
    • Battery Powered Contest

      Battery Powered Contest
    • Plastic Contest

      Plastic Contest

    Discussions

    1
    dfstk
    dfstk

    Tip 2 years ago on Step 1

    add a droplet of dish liquid - so the wasps will drown quickly and don´t have to struggle for life for minutes.