DO NOT THROW AWAY OLD SAWS ON WOOD I Have a Great Idea

Intro: DO NOT THROW AWAY OLD SAWS ON WOOD I Have a Great Idea

So don’t be in a hurry to throw away old unnecessary tools because you can make useful #DIY out of them.

STEP 1: I Made Two Small Cubes From the Trim Board.

STEP 2: He Removed Velcro From the Old Nozzle From the Drill, Only the Central Part Remained Alive.

STEP 3: I Cut the Size of the Workpiece and Glued It to Super Glue to the Bar.

STEP 4: We Will Take Replacement Sandpaper From Old Grinding Disks.

STEP 5: Now We Take an Old Nail File From a Jigsaw and With a Hammer We Fix It in the Center of the Bar.

STEP 6: for Reliability, Add Hot Melt, Here You Need to Make the Amendment That the Glue Needs to Be Used Good.

STEP 7: For a Reciprocating Saw, We Will Make a Nozzle and a Polypropylene Pipe, Make a Slot in the Center, Note That You Need to Leave Space From the Shank, for the File to Move.

STEP 8: It Turned Out Three Nozzles, It Remains Only to Show Them in Work.

STEP 9: It’s Not Always Possible to Make the Cutout Perfect.

STEP 10: This Nozzle Is Useful Here, But There Are Other Situations Where You Can Use This Homemade Product.

STEP 11: Ну С Круглой Насадкой Все Понятно, Всегда Пригодится.

STEP 12: Full Version of the Material:

If you liked this project, then be sure to subscribe to my YouTube channel and check out some of my other Instructables.

Comments

[allanblount3]

Well done- thanks for sharing your ideas.

[Yonatan24]

Nice. I think I've seen people glue sandpaper to the side of a blade. It's probably easier to remove since the steel won't get damaged.

[zengen]

All right

[Alex in NZ]

Great ideas :-) Thank you for sharing them :-)

[zengen]

thanks