Introduction: Drone Design in Autodesk Fusion 360
This project was based on designing an innovative Drone with dashing aesthetics and space constrained design.
Supplies
Autodesk Fusion360 and freehand sketching for reference
Step 1: Freehand Sketching
Drawings of what the final product will look like was drawn with specifying dimensions.
Later on the sketches were used as reference to design the components of the drone.
Step 2: Arm
Drone arm based on the sketch were modeled first and material was applied
Step 3: Frame
The Drone frame members were designed further based on calculated dimensions
Step 4: Exterior
To give an aesthetic appearance and aerodynamic compatibility, form tool was used.
Step 5: Simulation
Stress analysis on the components were performed.
Step 6: Assembly
All the components were assembled into a space together.
Attachments
Participated in the
Anything Goes Contest 2021