Enigma Machine V2 Instructions

I updated it and have a vid at bottom of it in action

It has a whole new feature and I separated it into chunks to build

Also I kinda took it apart before I made intro as to put it back while making it

Supplies

a lot of spacers also 1 gray spacer=3 blue they represent numbers 0-8 also 0/8 are the blank spot

Step 1: Knob 1

pretty easy

Step 2: Levers

now it’s one of the harder pieces to make

Step 3: Knob/lever Attachment

attach

Step 4: New Part Very Cool

now you only need spacer on one gear and it’s the one in pic

Step 5: Knob 2

little more complex

Step 6: Attach

Step 7: Parts

now here comes a few small things they should be easy

Step 8: More Stuff Harder

Step 9: The Wheels /hard!!!

they are arranged the same1,2,3,4,5,6,7,8/0

Step 10: Last But Not Least

pretty difficult

Step 11: Assembly

on last step if it puts up resentment make sure the pegs on top of the wheels are aligned in them

The second knob is to program it and if you look at original you will see how to use it this one is basically the same but with a knob to turn a single one at a time aka to program it

It useful for encrypting passwords it’s basically a translation machine that you enter a language into to translate numbers the language being what you program it as