Introduction: Evergreen Tree Ornament
This is a stylized evergreen tree ornament for the White House 3D Printed ornament contest. The .stl file prints two parts. It took about 4 hours to print on a Makerbot 5th Generation desktop printer.
Attachments
Step 1: Glueing the Two Halves Together
Once you have printed the .stl file, you will have two halves of the ornament. Carefully glue the two halves together. A Cyanoacrylate super glue makes a good bond between the two halves.
Once you let the glue bond set, the ornament is complete. Hang it somewhere out of reach of the cat and enjoy.