Faux Engraved Stone

by MadeByBarb

37K30221

Intro: Faux Engraved Stone

I just love stone! And the artist in me is always seeing ‘new canvasses’ to paint on! During some recent gardening I was looking at a pile of flagstone… What to do?!

This Simple Faux Stone Engraving technique combines a bit of imagination (technology) and paint to imitate stone chiseling. It looks amazingly real but is very easy to do.

Everyone keeps asking how did I engrave that stone?!

STEP 1: ​Step 1: the Letters

Find yourself a stone of shape and size you like. The flatter smooth stones are better, but it’s not that crucial. Use some digital software to pick a font and size. Even Microsoft Word can work as long as you enlarge enough. Do try to keep it simple and traditional, but that’s just the typographer in me talking.

Most home printers handle a letter size paper, but if you need larger you can print in pieces and tape them together. If you measure first it’s easier to plan. Size and place as you like, and tape into place with masking tape.

STEP 2: Transfer the Letters

You will now need to TRANSFER the image to the surface. I have much experience of this from my illustration world. You can use a sheet of old-fashioned carbon paper, or sewing transfer paper, or a sheet of paper that you rubbed with pencil. Place that sheet under your printed letters and easily trace the outlines with a pen to force the drawing onto the stone. I use a ballpoint pen.

Have a peek to see if it is coming through, since it is taped down you can continue until you have all the outlines. I used the red fabric transfer paper so I could see the lines well.

STEP 3: Time to Paint!

Time to paint! I used some basic black acrylic paint for outdoors. I had marvelled how some rocks my kids painted eons ago held the paint, so I knew it has staying power.

It doesn’t take that much artistic skill to fill in all the shapes with a fine brush. It is forgiving since it is stone.

STEP 4: Adding the Highlights

Now you become an artist! To make it look engraved you will need to add the ‘faux’ shadows and highlights. Imagine light hitting the indented letters from the top.

The upper part of all the letter forms needs a bit of a lighter gray to show light. It is very systematic.

STEP 5: Adding the Mid-tones

You can now add the mid-tone grey to the middle so that it looks as if there is a shadow under the top of each part of the letter. Simple isn’t it? Stand back and you will be amazed. If preferred you could just leave it solid black as well.

STEP 6: Stand Back and Look!

Since the stone is rough, the paint sticks and stays well, but you could add a layer of clear acrylic to protect even more. Maybe you want to add a logo etc, just apply the same principle.

STEP 7:

Smile and pat yourself on the back after you placed it in the garden. Perhaps add a light and have a great house number! Awesome! Let me know how your’s turned out.

See the full garden make-over here

19 Comments

thepoisonivy 4 years ago

Fantastic! So nicely illustrated. You made this very accessible.

mcorbin 4 years ago

I really like this. I have a large stone that I was going to try engraving numbers into with my dremel tool, but this is a much better idea.
What suggestions do you have for color if my stone is darker?

MadeByBarb 4 years ago

Nice Rock! I love the greenish hues. It will just be less contrasty. The mid-tones should be about the same colour as the rock and then the high-lights and shadows different. Don't be afraid to use some colour in the mix as just adding black is a bit of a 'colour deadener'. Stand back and see how it looks or an artist's trick; squint your eyes and it will give you the basic idea. Hope that helps!

McBaza 4 years ago

Great idea and the outcome looks amazing!

Question - what did you use to seal it afterwards so that you don't have to repaint it every year?

MadeByBarb 4 years ago

So far it's held good! (over 3 years) I find if it's on a vertical surface that does not stay wet it lasts well. The rougher texture also holds paint well. I have rocks that the kids painted about 15 years ago. I find the more layers the more chance to peel.

PatL38 4 years ago

Find a friend with a Cricut or Brother cutting machine and make a stencil.

MadeByBarb 4 years ago

Ah yes! I actually have a machine but I have not found the time to learn all it's abilities! I'm pretty quick with my hands...

rozzieozzie 4 years ago

Very cool! My sister in law taught tole painting, and this reminds me of some of her projects. In my spare time, I'll have to try this!

MadeByBarb 4 years ago

I've done much but I don't think I've done tole! Hmmm, something to checkout!

fdc313 4 years ago

Really nice post, I like the results

chefspenser 4 years ago

BRAVO! Got my vote due to the pinging technique. Thanks for sharing!

Gusgonnet 4 years ago

lovely work, I didn't even recognize the original tree. Super beautiful after the work you did.
I have learned so many tricks with this instructable and your full garden make.
Well done and thank you for letting us see it (and enjoy it) in pictures!

shylynchair 4 years ago

Barb, another fantastic instructable! Consider my vote cast in your direction!
It's amazing what the human eye thinks it sees, especially from a distance.../nate

BrittLiv 4 years ago

Such a fun idea and very well executed!

MadeByBarb 4 years ago

That's just the start, there are so many possibilities!

Dumbphone 4 years ago

This is brilliant! Your letter painting is awesome, and looks like engravings. Wow.