Introduction: Fish Trap

About: I always liked making stuff and when my grandfather showed me Instructables I became an addict. I don't have any degrees yet but I'm working on my aeronautics engineering degree :-P

Hi, in this trap i will teach you how to make a simple fish trap.

What you'll need:

1) Plastic bag.
2) Two wooden sticks.
3) Rope.
4) (In order to attract the fish you'll need bread) 
5) Tape.

Step 1:

First, cut 2 equal pieces of rope (it's important that they will be long enough so you can stand far enough from the trap, i suggest about 2 meters). 
Then, ape a stick to one side of the bag like in the photo.
Now tie one piece of rope to the middle of each stick.
Do the the same to the other side of the bag so it looks like a purse.

Step 2: Testing the Trap

Now take the trap to a shallow river, lake, etc. open the bag and fill it with water but leave a small air bubble inside, it helps keeping the bread inside.
Put a small stone inside to keep the bag open. 
The bag should be with its entrance pointing upstream.
Put a small piece of bread inside.
Hold the ropes Strained and wait for fish to come in.
Pull the ropes and move the fish to a box.

Step 3: That's It

I hope you enjoyed this guide, if you have any questions I will answer them happily.

Like this project? Check out my profile, my Facebook page and my YouTube Channel.