Introduction: Frankenstein Bolts
Here is my model "Frankenstein bolts"
-Accessoire To design a Halloween costume
Step 1: Modeling
I modeled thist using a software3d, export in stl format
Step 2: 3D PRINT
-Printed with dagoma discovery 200 with these parameters:
x: 19.72mm
y: 18.88mm
z: 52.86mm
-thickness layer: 0.15mm
-Filling: filled
-time: 41min
Step 3: Paint
I painted the model using spray paint
I introduce the bolts on a headband, using the notch...
Step 4: Final
And here is the halloween accessory:)
Step 5: Link
Stl : https://moon-station.mechamoon.com/index.php/produit/boulons-frankenstein/
![Design Now: 3D Design Contest 2016](https://content.instructables.com/FHW/6H76/IUSLFUZW/FHW6H76IUSLFUZW.jpg?auto=webp&frame=1&width=320)
Participated in the
Design Now: 3D Design Contest 2016
![Epilog Contest 8](https://content.instructables.com/FJX/Y82X/IVA4U7O4/FJXY82XIVA4U7O4.jpg?auto=webp&frame=1&width=320)
Participated in the
Epilog Contest 8