Introduction: Free 8 Colors Jumper Wires
This is my first instructable and I wanted free jumper cables.
As I am doing electronics for the first time, I must buy everything..
Before my money is gone, I am recycling as much I can.
As I am doing electronics for the first time, I must buy everything..
Before my money is gone, I am recycling as much I can.
Step 1: Let's Go
so let's start.
You need:
Old url cable(lying in a box in the attic)
cable cutter
free time...
First, cut utp cable in pieces.
.
5, 10, 20 cm long (as needed)
Pull one set of colours out of the utp piece, if necessary with the cutter.
Separate the two colors (white orange and orange in my case)
Strip 1 cm of either side of the wire.
You have many jumper wires for your projects.
please comment if you want
thanks
You need:
Old url cable(lying in a box in the attic)
cable cutter
free time...
First, cut utp cable in pieces.
.
5, 10, 20 cm long (as needed)
Pull one set of colours out of the utp piece, if necessary with the cutter.
Separate the two colors (white orange and orange in my case)
Strip 1 cm of either side of the wire.
You have many jumper wires for your projects.
please comment if you want
thanks