GadgetKeeper Weather Station




Introduction: GadgetKeeper Weather Station

GadgetKeeper development platform provides a complete application design, runtime, and intelligence environment allowing the rapid creation of IoT solutions to connect your sensors, devices, and equipment (“Things”) with people and systems.

GadgetKeeper provides a simple development environment, robust APIs and worry-free hosting, you can accelerate your application development and take advantage of simple scalability as the application and the number of your devices grows.

You can easily integrate your application with external IT systems through our powerful APIs, web services, and a completely hands-free hosting environment that automatically scales to meet any demand, whether you’re serving several devices or several million.

In this Instructable I'll make a simple weather station using GadgetKeeper IoT Cloud Platform.

Step 1: Parts

1× Arduino UNO board

1× Arduino Ethernet shield

1× DHT11/22 temperature/Humidity sensor

1x 10k resistor

Step 2: Prepare the Hardware

Since most of the Arduino shields are usable as a stack, you need to apply less effort to setup the hardware. The final setup will be as follows. The connection with DHT11 is described in picture above.

Step 3: Add Required Additional Arduino Libraries

I have used Arduino 1.5.6-r2 version as the IDE.You can download it from this url.( Also the required libraries can be downloaded from following links.

HttpClient library

DHT11 library

All other required libraries are available as standard libraries with the IDE.

Step 4: Configure GadgetKeeper

After successfully creating account on GadgetKeeper, go to console and create the "weatherStation" thing first.

Step 5: Configure GadgetKeeper

Then create the "temperature" and "humidity" properties under weatherStation as follows.

Step 6: Arduino Sketch

This is the arduino sketch for uploading temperature and humidity values to the GadgetKeeper.


Information about uploading Arduino Sketch can be found here.

Be the First to Share


    • Puzzles Challenge

      Puzzles Challenge
    • Lamps Challenge

      Lamps Challenge
    • CNC and 3D Printing Contest

      CNC and 3D Printing Contest


    Devin Ross
    Devin Ross

    7 years ago on Introduction


    It seems like a nice IoT Cloud Platform. It would be nice if you could do the same project but only using ESP 8266.

    Best regards.


    Reply 7 years ago

    ESP is comming soon.