Introduction: HOMEMADE VR HEADSET USING HOUSEHOLD ITEMS
Hey, did you know that you can make a VR headset at home? And it is not gonna cost you a thing as all you need, you can probably find around your house. It super easy to make and anyone can do it. :)
For this project you will need:
- Clear plastic bottle 2L preferably from pepsi.
- hot glue,
Lets get started. :)
Alternatively you can buySinbury® Google Cardboard Headset 3D Virtual Reality VR Goggles for Android iPhone Ios with NFC and Head-strap
Step 1: WATCH VIDEO!!!
Step 2: Cut Out Lenses
First thing you do, cut off all the parts of the plastic bottle you wont need. All you need for this is the top part of the bottle next to its neck. take a cork and use it to draw circles like shown in pictures and cut out 4 circles with scissors. It is important to use the bent plastic next to the neck as it is perfectly shaped for lenses.
Step 3: Make Lenses
Now glue two circles together so there is an air cup between them. use hot glue and carefully glue edges around circles. Leave a little hole so you can fill your lens with water like shown in the pics. Or WATCH VIDEO. Then fill the hole with more hot glue. Make sure lens is well sealed and no water comes out, if it does, try finding the leak by submerging lens in water and see where bubbles come from. Do the same for another lense. You got two eyes and you will need two lenses.
Step 4: Make a Box
This step is very straight forward, you need to make a boxslightly bigger than size of your phone, and it has to be around 5cm shallow. since the distance between your smartphone and lenses should be around 5cm. Once again Watching video will help you understand process better. Then cut out rectangular hole in one side for your phones screen and two circle for your lenses. then glue lenses in place using hot glue.
Step 5: Make Soft Mask
Right almost there, now your box should have a lid that is going to hold your phone in place, if you dont then just make one and glue it to your box. now to lock lid so it hold your phone you may use Velcro or magnets. i used two strips of magnets from an old learner plate. Now find a piece of foam and cut it so it fits your face. so basically you need to make a mask that fits you face, Nose, forehead, holes for eyes. and glue it to your now finished VR headset. Turn on some Virtual reality app on your phone or 360 video and place your phone in. You know what to do next. Enjoy your Virtual Reality experience
Subscribe to my youtube chennel if you like this project. More projects comming soon. .