Introduction: How to Build a Vibrant Walle ?
More by the author:
About: Makeblock was founded in 2012 as the world's first open-source robot and programing platform. With more than 400 mechanical components, electronic modules, and software tools, we are determined to bring meanin…
The Makeblock Walle uses Arduino, and other Makeblock modules. It can automatically nod,shack head,wave,and dance ,controlled by IR .
For more information, please visit Makeblock website listed below: www.makeblock.com Getting Started This instructable, Makeblock Walle, will show you the step-by-step instructions on how to build a vibrant Wallet by Makeblock.
Now let’s enjoy it!
Step 1: Meterials List
- Mechinery list
- Beam0824-80
- Beam 0824-112
- Beam 0824-128
- Beam 0824-144
- Beam 0824-160
- Beam 0808-080
- Bracket 3x3
- Bracket 3x6
- Plate 3x6
- Bracket U1
- DC Motor-25 6V/185RPM
- 9g Micro Servo
- Pack Shaft Connector-4mm
- MG995 Servo Hub
- MG995 Servo Hub
- MG995 Servo Bracket
- Timing Pulley 62T
- Timing Pulley 90T
- Track
- Track Axle
- Threaded Shaft 4x39mm
- Shaft Collar 4mm
- Flange Bearing 4x8x3mm
- Socket Cap Screw M4x8-Button Head
- Socket Cap Screw M4x14-Button Head
- Socket Cap Screw M4x22-Button Head
- Nut M4 Countersunk Screw M3x8
- Headless Set Screw M3x5
- Brass Stud M4*16
- Plastic Rivet R4060
- Plastic Rivet R4120
- Plastic Ring 4x7x2mm
- Electronic mudule lis
Me BaseboardMe
IR ReceiverNew Me
IR Remote Controller
Me RGB LED
LED RGB Strip-Addressable, Sealed(0.5M)
Me RJ25 Adapter
Base Bracket B
- buy now
Step 2: Make Walle Chassis
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
Step 9:
Step 10:
Step 11:
Step 12:
Step 13:
Get this package:www.makeblock.com/
More tutorials please visit http://openlab.makeblock.com/Our community: http://www.makeblock.com/
