How to Make Dual Shaft DC MOTOR

by ROBO HUB

6.1K319

Intro: How to Make Dual Shaft DC MOTOR

Hello Readers This is a really special instructable in which i modified a single shaft DC Motor to a Double Shaft in Very Easy Way..

Bonus Tip: Check www.letsmakeprojects.com for much more interesting content

STEP 1: Hate Reading? This Video Is for You Https://youtu.be/eD83yzwaECs


Complete Video Tutorial Which Shows Modifying Single Shaft to Double Shaft in 2 Ways

Video link https://youtu.be/eD83yzwaECs

STEP 2: Lets Begin

  • Have a Look at Your DC Motor!
  • Remove it by opening the closed hooks in the side
  • Remove the Rotor from Inside
  • Try Hard to remove the shaft(it is little bit tricky to remove shaft)
  • if you didn't get how to remove shaft go back to previous Step!

STEP 3: New Shaft!

  • After the Old Shaft is Removed,replace it by new one
  • insert the new shaft
  • Fix it using superglue
  • Put Back Everything in place
  • Now run the motor with battery
  • Dual shaft Motor is Ready For Action!

If You Liked this instructions Please share with your family and Friends! Have a Great Day.Bye

8 Comments

Gandolf the green 6 years ago

Something to try for removing the shaft is to use vice grips and a piece of sheetmetal with a hole that is slightly larger than the shaft. Thread the shaft through the hole in the sheetmeral and grab it with the vice grips. Clamp the sheet metal to the table and you should be able to pull out the motor shaft quite quickly

Dhruv Bose 6 years ago

I don't think removing the shaft is that easy, but a nice idea nevertheless.

ROBO HUB 6 years ago

Ya it's a little bit trickier!

Troels 6 years ago

Nice tutorial, but the video is not there.

ROBO HUB 6 years ago

Please check step 1 for video....

AshishSabharwal 6 years ago

Please provide link to video as well. Embedded videos are not supported in i'ble app. Btw, grt work.