Hi guy today I show you How to Make Simple 4 channel ON OFF remote control. For remote control light,remote control fan,remote control motor,remote control light bulb....

Step 1: Watch This Video From Youtube

This video from my channel will show you about my project

Step 2: Make the Schematic

I use Eagle software for make it. You can download this as PDF file in here and download the code for Attiny here

Step 3: Make PCB by Upload Gerber File to the JLCPCB.COM

Go to https://jlcpcb.com/ for make PCB online

Only 2$ /10pcs for 2 layer PCB and Big Discount on First order Shipping

https://jlcpcb.com/ Upload your gerber files and fill in Shipping Adress then click PAY.

Step 4: Received Your PCB After 2 Day

The PCB look great and beauty

Step 5: Order the Component

List of part here

3V battery CR3032

3V battery CR3032 hoder

4 button 2 pin

5 transistor c1815

1 ir led

1 ir led receiver

2 Attiny 13A

1 transistor s9013

1 1ohm resistor

1 100ohm resistor

3 47uf/16v capacitor

4 relay 12V 5 pole

1 Lm7805

1 104 capacitor

5 2.2kilo ohm resistor

5 led 3v

5 4007 diode

4 1kilo ohm resistor

6 domio 2 pin

1 12VDC power source ( adapter)

Step 6: Solder PCB

Solder all component to PCB. We have the name on the top PCB. So this very easy

Step 7: Check and Connect With Load

Oh it work geat

Introduction: How to Make Simple 4 Channel ON OFF Remote Control