Introduction: How to Make a Pallet Garden
Not everyone lives in a picture-perfect-house-with-a-backyard. Is that a good enough excuse for most of us to not have a garden? Is that good enough reason to not dig our hands in the soil and smell the essence of the earth? Not anymore!
This upcycler's dream garden adds beauty and color even to the smallest dullest balcony! We added it to our soil-less yard.
Here is how to make it:
You will need:
• 1 pallet
• 3 m landscape fabric of weed cloth
• 100 litres potting soil
• 1 staple gun and staples
• plants of your choice
Optional (if the pallet needs repairs)
• 1 sander
• 1 hammer and nails or 1 screwdriver and screws
Step 1: REPAIRS
• The first thing that you have to do is to have a good solid pallet. You also have to make sure that its openings are big enough to get your fingers in, otherwise you're going to have a hard time planting. You don't want them to be too big, either. ATTENTION: Make sure that the pallet says "HT" on it. That means that the pallet hasn't been sprayed with harmful toxic substances. We don't want nasty chemicals leaching their way into our veggies.
• The first step is to see if the pallet needs any small repairs. If it does, then we repair it with nails,screws, or staples.
• Sand the pallet not to get any splinters. You can keep sanding to get the smoothness you like and you can even add colour to it by using non-toxic paint.
Step 2: COVER THE BACK
• Take the landscape fabric and fold it in half
• Using the staple gun, secure it onto one side of the pallet
• Stretch the fabric and do the same onto the opposite side
Step 3: COVER THE BOTTOM
• Then bring it on the underside (when it is standing up) and staple the material here firmly to stop the soil from falling out
• Staple the fabric at the top, too
Step 4: SECURE THE FABRIC
• Also staple the fabric in the back of the pallet, along its 'spine', so that soil doesn't sag behind
Step 5: PLANT
• Place the pallet close to its final location
• At the top opening of the pallet, wedge in plants in order to close the gap
• Fill the pallet with potting soil and make sure it goes into all the corners
• Water lightly
• Make small indentations with your fingers and plant the plants, close to each other
• Finally, water lightly again
Step 6: WAIT...
• Leave the pallet lying down for about 10 days, until the roots grab the soil
• Water daily or as needed
• About 10 days later, carefully lift the pallet up (fair warning it will be heavy) and place it at its final position.
... et voila!
You can view the how-to video here:
Please subscribe to our channel here:
Please subscribe to our newsletter here:
Participated in the
1 Person Made This Project!
- pureandnatural made it!