Introduction: How to Run a Challenger
today i will teach you how to run a challenger
Step 1:
Put the key in the ignition
Step 2:
Push the clutch in
Step 3:
Hold the clutch in and turn the key to on position
Step 4:
Release the clutch to go into neutral
Step 5:
Take parking brake off
Step 6:
Push clutch in and put the shuttle shift into forward
Step 7:
Push lever on right hand console forward to speed up
Step 8:
Step 9:
Pull the lever back to slow down
Step 10:
How to engage the PTO
Step 11:
Put the tractor in neutral
Step 12:
Let the tractor idle
Step 13:
On the right side there is a yellow switch that is yellow u push
Step 14:
Wait to hear the pto running
Step 15:
and now we're ready to run the tractor