How to Uncrease Your Sneakers!!
Intro: How to Uncrease Your Sneakers!!
Want to get rid of those ugly crease lines in your sneakers? Follow these steps to get rid of them! This method is primarily for leather material shoes. I used an iron with a steam feature on my Jordan Retro 5's "Fire Red".
STEP 1: Gather Your Materials !
You will need 1:Creased sneakers (leather material) 2. A bottle of water 3. A iron that can produce steam 4. Cardboard inserts 5.paper 6.2x Wash clothes
STEP 2: Fold Your Packing Paper
Grab some regular paper, this will be used pack the inside of the shoe.
STEP 3: Bring Them Together
The better packed the paper is the better it'll form to the shoe. Once the leather cools down it will return back to the original shape.
STEP 4: Put Them In
Place inserts inside the shoes. The forms I used were from the original box. Make sure the shoe forms correspond with the correct feet.
STEP 5: Remove the Laces
It is easier to iron the toe box of the sneaker without the laces being in the shoe. Additionally, removing the laces protects them from being burnt.
STEP 6: Fill Up the Iron
Fill up the iron with water to the designated line. Do not have the iron plugged in.
STEP 7: Prep!
Before you start ironing grab 2 cotton cloths to put over the shoe. These cloths will be used to protect the shoe from burning.
STEP 8: Protect Your Product.
Pour an excessive amount of water over the toe box. This will protect the shoe from being burnt.
STEP 9: Start Ironing
Begin to iron the cloth over the areas where their are creases on the shoes. Let the iron steam on the shoe to warm up the leather this will cause it to stretch.
STEP 10: Let Them Cool
At this point your about done. Let the sneakers cool down with the cloths still on them so the change in temperature wont be to dramatic.
41 Comments
dchall8 10 years ago
bjagne jr. 10 years ago
chrisnata503 1 year ago
i9ll05434 3 years ago
julian.maxwell 3 years ago
jlvandee 3 years ago
Idk_1 4 years ago
stonerplays 4 years ago
YaaseenDollie 5 years ago
Some_nobody 5 years ago
juayl 6 years ago
Would this work the same with a steam iron for jordan 1s?
AshleyL104 6 years ago
CookieM5 6 years ago
johng652 10 years ago
OrienteeringPro 10 years ago
No, this would ruin real leather. Sneakers aren't made of real leather. There's no difference in the before and after pictures of these sneakers either...
MixGeek. 6 years ago
ColeP22 6 years ago
tbibb 10 years ago
TH4 9 years ago
i tried this method for a leather holster i use. same principle really except in a square shape just for some old wrinkles i want out before the dying process but now i can throw it away and buy a new one.
the problem with this guide is that it's made to sound like anybody can do it and that absolutely nothing can go wrong and that's where i made the mistake, i put faith in an online article and now i pay the price.
in the future please consider warning about the downsides and don't do's. if done wrong you can seriously ruin any leather product. i can't tell what the cause is but i made it x10 times worse while following the guide. what started as a few small stripes turned into wrinkles that would put a bearded lizard to shame.
Josephs4 7 years ago
it's a jordan/shoe guide, not a leather holster guide dumbass