How to Make a Tech Deck Quarter Pipe

27K817

Intro: How to Make a Tech Deck Quarter Pipe

Yet another tech deck instructable by me.

STEP 1: Materials

1. a cardboard box
2. duct tape
3. scissors
That's it!!!!!!

STEP 2: Making It

First you need to take apart the box and use just one section for the perfect size for the quarter pipe. You need to completely cover it in duct tape for smoothness. For now, set that section to the side. Take another section and cut it to the angle you want your quarter pipe to be at(the picture is a good example), you will need to make two exactly the same. You can cover the angle thing with duct tape(I did) but it is only for looks. Then take the piece you set aside and curve it onto the angle thingy. As you hold it on, tape them together very tightly.

STEP 3: That's It

If you want it to be more stable, tape it to the ground. If you have any suggestions please leave a comment. Please vote for me!!!

17 Comments

IT WORKS GREAT!!!!!!!!!!!!!!!!!!
im 10 and the only trick i can do on a tch deck is shove it dats all i need peeps teaching me
hi i have made you're ramp and it is good but i can't get it to stay straight
straight as in upright or straight as in a good curve on the ramp?
as in a good curve
well the duct tape should be holding the curve together. you might want to start over and if you do you must curve the cardboard THEN put the tape on as tight as possible to make it smooth.
i have made one myself and i painted and customised it with stickers and a grind rail
just wondering if there is ANY ONE that can make me a woden or cardboard skatepark for 40$ or under. if you go to blackriver-ramps.com for ideas.
i made one but my tech deck gets stuck on the bottom of the ramp how do you stop that?
i made a half pipe it is big as
Yaaaaaay duck tape! God's solution for everything!!! =]