Introduction: Junk Bot

This instructable will tell you how to build a junk bot.

Step 1: What You Will Need

Supplies: Tin foil, card board, empty tape roll, scissors, googly eyes, used white eraser, mechanical pencil inside, paper clip, bead, pen top, and an old battery. Tools: hot glue gun and box knife.

Step 2:

Cut all cardboard pieces you need.

Step 3:

Cover all cardboard pieces in tin foil.

Step 4:

Glue the battery the back of the cardboard.

Step 5:

Now attach the small piece of card board to the bigger one with hot glue.

Step 6:

Attach the rocket legish things on the back with hot glue.

Step 7:

Now take apart the tape roll and attach it how you want with hot glue.

Step 8:

Attach the eraser where you want to on the front.

Step 9:

Attach the googly eyes where you want to.

Step 10:

Make the ray gun out of the pencil inside and attach it.

Step 11:

Cut the pen top to fit under the battery. Then put the pen top under the battery and secure it with glue.

Step 12:

Make a little fake light with a bead and paper clip. Then attach that to the back.

Step 13: Done!

Congratulations you have now built your own junk bot.
Instructables Green Design Contest

Participated in the
Instructables Green Design Contest