Knex Ball Machine Element: Falling Bridge

by Thibault Art

1.5K514

Intro: Knex Ball Machine Element: Falling Bridge

Hey everyone,

These instructions shows you how to build a falling track element that can be used as a bridge. This element is very usefull when you need a ball to cross over something without loosing too much height. Just make sure you have all the wheels and tyres that are needed to make this element (see step 2). It's pretty big and works 99% of the time. If you want to see this element in action you can always watch the video.

If there are any poblems/ questions feel free to ask me in the comments below.

Thanks for watching/ building,

Thibault art.

STEP 1:

STEP 2:

STEP 3:

STEP 4:

STEP 5:

STEP 6:

STEP 7:

11 Comments

LittleBilly 7 years ago

Ok. It finally let me watch it. When are you going to post instructions for the heads? Those were really cool

Thibault Art 7 years ago

Thanks. I'll try to post all the elements (including the heads) by friday.

josephrichardcooper 2 years ago

I might build this but I will have to think about it because it is so hard can you make an easy one

KnexXHyperX 3 years ago

I built it. It took awhile but I still did it

KnexXHyperX 3 years ago

How many big and small wheels were in the falling bridge

Thibault Art 7 years ago

Thank you a lot for all your favorites!!! It means a lot :D!

The Knex Inventor 7 years ago

You are welcome! Thank you for posting all of these great elements!

Thibault Art 7 years ago

I just looked to see if there was any problem, but it looks to work fine. Maybe if you go to my YouTube channel you will be able to watch the video :).