Introduction: Knex Colt Revolver
This is the Knex Colt Python revolver from Call Of Duty that I copied from Zombiekiller-93 and matthew9876 but I modded some parts like a working hammer. (This is a model so it wont shoot but the hammer works) This is not my own creation so all credit goes to Zombiekiller-93 and matthew9876.
Supplies
- 60 green 16mm rods
- 13 white 32mm rods
- 1 blue 54mm rod
- 1 orange 86mm flexi rod
- 3 white 8-way connectors
- 2 blue 7-way connectors
- 22 yellow 5-way connectors
- 3 green 4-way connectors
- 6 red 3-way connectors
- 1 light grey 2-way connector
- 11 orange 2-way connectors
- 8 blue clips
- 2 tan interlocking clips
- 2 purple clips with hole end
- 2 light blue spacers
- 21 black clips with rod end
- 5 black/light blue hinge assembled
Broken/cut pieces
- 12 white 32mm rods with ends cut off
- 6 blue 54mm rods with ends cut off
- 1 yellow 5-way connector with 3 of the connectors cut off
- 6 white 8-way connector with 2 of the connectors cut off
Step 1: Handle+Trigger
This step might be a little tricky.
Step 2: Body+mag Well
Step 3: Barrel
Step 4: Finished+how to Use Hammer
Have fun with it and leave a comment!