K'nex M4A1
Intro: K'nex M4A1
####(For Version 2, Click 7th step.)####This is kinda like Fartonia's M4A1 This gun doesn't shoot but other than that it has a removable clip, reloading pully thing and an iron sight :D! Check it out, if you have any questions let me know :D!
STEP 1: Removable/Detachable Clip
Pretty simple, notice the fact that you gotta bend some stuff to make it look "realistic"
STEP 2: Tip/Handle/Barrel
Kinda complicated for the tip area, but if you have any questions, just let me know
STEP 3: Stock/Butt
STEP 4: Trigger/Handle/Mag Holder
Kinda tricky here too but you'll get it, i know you will :D!
STEP 5: Body
any questions? comment or send me a msg :D!
STEP 6: Attachments
Easy peasy Lemon Squeezy XD lol sounds wrong
STEP 7: Lowering the Pulling Thing (V2)
Okay you need to read very carefuly. You see how on the pull back mechanism, there are 2 connectors. Grey or purple. one is up and the other 1 upside down. Replace the Grey/purple connector with a Orange Connector. the one that looks like a ladder? i call it the ladder connector. So The connector with 1 hold and 1 conector spot. replace it with a Ladder connector. When you are done Just attach the Mechanism on the bottom of the ladder.
63 Comments
1v1 LOL king 5 months ago
ajaffarian 3 years ago
Knexman19883 4 years ago
KnexGeek17 10 years ago
KnexGeek17 10 years ago
The Knexer 11 years ago
shenson1 11 years ago
shenson1 11 years ago
rheath2 11 years ago
The Red Book of Westmarch 12 years ago
Element Force 12 years ago
Element Force 12 years ago
kusstemz 12 years ago
bob the HUNTER 12 years ago
dr. richtofen 12 years ago
josh thwaites 12 years ago
hbk0798 12 years ago
defienetly pretty cool model though :)
black ops 12 years ago
keep going on
dansdoc 13 years ago
joey99 13 years ago