Introduction: Knex Slingshot Pistol
This is a slingshot pistol i designed using I am Canadians striker pistol mech . It gets 35 feet . Part list. Connectors Yellow connectors 18 Red connectors 7 White connectors 3 Green connectors 1 Orange connectors 5 Y connectors 2 Light Grey connector 1 Dark grey connector 1 Rods Green rods 39 White rods 27 Spacers Grey spacers 1 Blue spacers 2
Step 1: The Frame.
Build 2 of these one with out the white rods
Step 2: The Internals.
Step 3: Adding the Internals.
Put these parts in almost done!
Step 4: Add the Other Side of the Frame On
It is easier to add on when you take apart the second frame then put it on piece by piece.
Step 5: Adding Rubber Bands
You will need to double up a rubber band most likely to do this grab a rubber band and turn one end clockwise then fold it on its self. I used 64 an 32 type rubber bands
Step 6: Making Ammo and Firing
Pull rubber bands back to white connector and put the ammo in the top aim and fire.
Participated in the
Toy Rods and Connectors Contest
1 Person Made This Project!
- botboy6901 made it!