Knex Megablaster Gun
Intro: Knex Megablaster Gun
This is a simple knex gun I made that does not use too many pieces.
STEP 1: Pieces
Rods:
2 grey
2 grey
7 dark blue
7 white
6 yellow
2 green
Connectors:
10 grey
9 red
4 green
6 orange
2 yellow
Other:
1 rubberband
2 brown/black connecting rods
21 blue circles
3 brownhubcaps
2 grey
2 grey
7 dark blue
7 white
6 yellow
2 green
Connectors:
10 grey
9 red
4 green
6 orange
2 yellow
Other:
1 rubberband
2 brown/black connecting rods
21 blue circles
3 brownhubcaps
STEP 2: Make Parts
Make the frame. Make 2 of these [2nd not shown].
STEP 3: Attach Parts
Attach the two frames.
STEP 4: Make a Part
Make the ammo holder.
STEP 5: Add Simple Parts
Add these two things to the top of the frame.
STEP 6: Attach Parts
Attach the ammo holder to the top of the frame
STEP 7: Make Parts
Make the triggers.
STEP 8: Attach Parts
Attach the triggers to the top of the frame. You may need to take off other pieces first. You will also need to add on pieces you have not used yet. You will then have to add back on all of the pieces you took off in the same spot.
STEP 9: Make Parts
Make the firing pin.
STEP 10: Attach Parts
attach the firing pin .
STEP 11: Loading and Firing
To fire and load put down the first trigger and put the ammo in the front. Put down the 2nd trigger down and the first up. To fire put up the first trigger.
30 Comments
knex boy 16 years ago
liamjohnson 14 years ago
Zideeane 16 years ago
crazyhellman 15 years ago
liamjohnson 14 years ago
Stavroz 16 years ago
Cartuner55 16 years ago
Cartuner55 16 years ago
gunmanx 17 years ago
Cartuner55 16 years ago
sportychelseafan 16 years ago
Knex Lego Maniac 17 years ago
Super Shooter 17 years ago
not-killerk 17 years ago
killerAP 17 years ago
toulvus 17 years ago
Dec20056 17 years ago
sinan 17 years ago
Goalkeeper303 17 years ago
Goalkeeper303 17 years ago