Knex Wii Controller With Grip!!!
Intro: Knex Wii Controller With Grip!!!
This a easy instructable for people that like to hold the Wiimote sideways for SNES games or others. Don't forget to rate!
STEP 1: Parts You Will Need
These are the parts you will need
STEP 2:
Make two of these
STEP 3:
this part will be the bottom half.
STEP 4:
This will be the top half of the controller.
STEP 5:
Now connect both halves as shown.
STEP 6:
This step shows how to make the grip(If you want you can emove this for use as a steering wheel).
STEP 7: READ!!
And your Done!! Note that when inserting the wiimote make sure that both ends are being held firmly by pushing in on the wiimote and to push the top end next to the remote.
60 Comments
vishalapr 12 years ago
Have a look at my cool ibles I have made as well, and I might subscribe to you coz I like your ibles
knex_mepalm 14 years ago
Capt. Fat 14 years ago
P.S. if you care so much why don't you make one yourself.
knex_mepalm 14 years ago
KnexFreek 14 years ago
crazyguy13 15 years ago
Capt. Fat 15 years ago
crazyguy13 15 years ago
Capt. Fat 15 years ago
DrWeird117 15 years ago
Capt. Fat 15 years ago
DrWeird117 15 years ago
Capt. Fat 15 years ago
ppprfldr 15 years ago
DrWeird117 15 years ago
Capt. Fat 15 years ago
Capt. Fat 15 years ago
DrWeird117 15 years ago
Capt. Fat 15 years ago
Capt. Fat 15 years ago