Introduction: LED Pattern2 Using ATMEGA16
Now lets make a led pattern using atmega16.
Step 1: Requirements:
Hardware:
1. AVR trainer board with atmega16
2. AVR USB programmer
3. 10-10 FRC
4. 12V adapter
Software:
1. Atmel Studio 6
Step 2: Making It:
The trainer board is connected to usb programmer. Then connect PORTC to LED port. Upload the code from PC. Here I have already uploaded the code to chip(in YT video). Remove the USB. Connect 12V adapter and turn the switch on. The LEDs start glowing in a pattern. You can download the code I have uploaded.
Attachments
Step 3: Demonstration:
Step 4:
For further details email to rajtech154@gmail.com