Lawnfixer, a 3D Printed Gardening Tool for Lawn Care

4,168

62

2

Introduction: Lawnfixer, a 3D Printed Gardening Tool for Lawn Care

About: Tovdesign is a multidisciplinary design studio based in Belgium, founded in 2002 by Tom De Vrieze, offering design consultancy, (rapid) protoyping and VR immersion. Awarded with Belgium's leading design award…

A 3D-printed garden tool, mounted on a broomstick, to repair dead patches in your lawn.
Aeration, Verticutting & Overseed in one. Proportional grass seed dispenser.

Having a small garden in the city of Antwerp I noticed some lawn spots., dead patches in my garden. Caused by varies reasons such as too much or too less sun, pets, soil problems, ...

The conventional way to repair lawn spots is using a lot of garden tools and manipulations such as : spade, aerator rake, star tiler, .. So i wanted to shortcut all of these tools in one, and most of important, not to damage the existing plants/grass.

And so lawnfixer was created, all-in-one garden tool : plow, aerate and overseed.

Two ways to use (see the video) : A. the soft way : Scratch & Seed. B. the hard way : Plow & Strew.

Advantages : - optimal use of seeds. - healthy grass around lawn spots are not destroyed.

You can download the file and print it yourself for non-commercial use.

Notice : it is designed with the design rules for SLS printing, but perhaps you can modify the model yourself for your type of 3D printer.

Be the First to Share

    Recommendations

    • Stone, Concrete, Cement Challenge

      Stone, Concrete, Cement Challenge
    • Water Speed Challenge

      Water Speed Challenge
    • Backyard Contest

      Backyard Contest

    2 Comments

    0
    acandelori
    acandelori

    5 years ago

    You really should be pulling plugs. The tool now compacts the soil