Introduction: Led Star
In this tutorial I want to show you how to make a nice led "star".
It looks great, and parts cost nearly nothing.
I hope you have fun making your own!
Here is the part list:
-2 single core wires, can be detached from somewhere(I used old pc power supply wire)
-6 LeDs (Can be any color, I used 5mm ones)
-Few tools (soldiering iron, something to cut isolation(can be even normal scissors), etc.
Step 1: Lets Start With...
...taking off the isolation from our wires
Look at photo number 2. U need four leds.
With first two twist the positive lead.
With second 2 twist negative lead.
Now put them one on top of another keeping + with +, -with -.
You should end up the same as me.
Step 3: Soldering
Connect places 1 and 2 (foto no. 2).
Step 4: Connecting
Now if you finished soldering you need to twist 2 leads of each 2 led "packs". 1 negative and 1 positive.
While putting them together , remember the gold law: - to - + to +.
Step 5: Last Steps
Participated in the
Lamps & Lighting Contest