Introduction: Light Up Bike Spokes
Step 1: Supplies
You will need a light up glove from a local prize counter or dollar store and good tape.
Step 2: Step 1
You will want to cut or tear the glove open, but be careful not to cut the wires
Step 3: Attaching
I used black hockey tape and attached the battery to the spoke
Step 4: Done
You are done
![Battery Powered Contest](https://content.instructables.com/F17/FTS5/HH2VJPTU/F17FTS5HH2VJPTU.jpg?auto=webp&frame=1&width=320)
Participated in the
Battery Powered Contest