Introduction: Magnetic Camera Arm

By
About: ...

I made this magnetic camera mount to assist me in making my Youtube videos. This is a easy project to complete. All the parts are easy to find from Amazon and your local hardware store.

Step 1: Parts List

You will need

One Articulating Camera Arm

Three Magnetic

Three 10-24 machine screws and nuts

One 1/4-20 nut

Step 2: 3d Print

3D Print the base of the camera mount. Follow this Link to my Thingiverse page for the STL file and print settings.

Step 3: Prep the Base

Insert three #10-24 nuts into the outside three hex sockets. Insert one 1/4-20 nut into the center hex socket.

Step 4: Assembly

Using three #10-24 machine screws fasten the three magnets to the Base. Screw the Arm into the 1/4-20 nut with the Base between the arm and the nut.

Step 5: Left Over Magnets

I ended up with several magnets left over. Here are a few ideas to put them to good use.

Magnetic Hook

Magnetic Knob