Micro RC Car Teardown

36,568

46

63

Introduction: Micro RC Car Teardown

About: Middle aged geek username also works at yahoo.com, mac.com, comcast.net, wharton-10.arpa

This is sort of an "example" instructable for the Dr Destruct-O Teardowns group; something I did a few years ago. I don't know if this particular car is still available, but...

This is one of those mini remote controller cars that was all over, selling for $10 or less. It wasn't so great as a car; the "stunt" capability is derived from spinning the front set of wheels on a axis that runs down the centerline of the car, so you can't really steer it; you can just make it go forward, back, and tumble around. But the two channel Radio control might be reusable, and perhaps there are some tiny gear motors that might be extractable...

Step 1: Under the Cover

I recall this being pretty easy to take apart. The body of the car comes off in an obvious way (small philips head screws?) This is what it looks like under the body, before further disassembly.

Step 2: Electronics

The radio control receiver is on a nice tiny board that is surprisingly well labeled. Since there are two motors to control in this car, there are two fully-reversible motor drivers. On the minus side, the board uses "chip on board" (the main "smarts" are a a bare chip under that black plastic blob), so some of the modifications possible on receivers with identifiable chips and pins aren't possible here.)

(It would be nice to have pictures of the transmitter as well. Sorry...)

Step 3: Naked Electric Car Guts

Here are the "internals" completely separated from the chassis of the car.

Note that the motors detach complete with their respective gearboxes, and have convenient places to attach devices other than the original wheels. This is EXTREMELY valuable; all too many toys have their gears mounted directly on the chassis, and by the time they are apart you have a motor and some loose gears. With the stunt car, you wind up with TWO gear-box motors, which are regularly worth about 10x the price of a bare motor on the surplus market.

Step 4: Motors and Batteries

Here are closeups of the motors and the batteries.

The batteries are labeled as being "80 mA" (which isn't really a valid thing to say.) They probably mean 80mAH, which makes these NiMH cells. They're 1/3AAA size; which was pretty popular back before the serious RC crowd converted to LiPO.

The motors and batteries in this car are easily worth the $10 price tag on the car, even if you can't utilize the remote control...

Be the First to Share

    Recommendations

    • Home Decor Challenge

      Home Decor Challenge
    • Toys & Games Contest

      Toys & Games Contest
    • Box Challenge

      Box Challenge

    63 Comments

    0
    RC Lover san
    RC Lover san

    4 years ago

    You can make amazing "things" with that car.

    Please take a look at my Instructable...

    https://www.instructables.com/id/Whats-Inside-My-RC-Lego-BB8/

    0
    taltaltal
    taltaltal

    Reply 6 years ago on Introduction

    ya.how is taking apart a car a project

    I literally have what is shown in these pictures on my desk in front of me right now.

    0
    Eddie4
    Eddie4

    8 years ago on Introduction

    how you were saying your not sure if that car is still availablei just bought one at a car show

    0
    dharmik
    dharmik

    9 years ago on Introduction

    can any permium member send me the pdf of this to my address dharmik33@gmail.com pleaseeee...

    0
    snoopindaweb
    snoopindaweb

    9 years ago on Step 4

    Thanks for verifing the parts, My Step Dad was a TV & Radio repairman in the 60's, but thats about It, cOOl. G-G

    0
    Jedrokivich
    Jedrokivich

    10 years ago on Step 2

    I just had a vision of a tiny tank robot with those two motors and batteries.

    0
    pennnny
    pennnny

    10 years ago on Step 4

    what would you recomend using the stuff for?

    0
    aeronut01
    aeronut01

    10 years ago on Introduction

    Thanks for posting this! It was helpful in aiding me in taking apart one of these without destroying it. I used the receiver in a remote controlled firework igntier and it was a huge success! I'm making an instructable on that soon, and I was wondering if it would be alright to put a link on my instructable that would lead to yours? It's to show the viewers what R/C device I used and how to disassemble it to get the receiver out.

    Hey, I have this same RC....I am ready to take mine apart... Any Ideas on what i could use the engine, wheels, and batteries with?? Awesome pics!! plz reply

    0
    Madrias357
    Madrias357

    Reply 12 years ago on Introduction

    Make a plane using them. That's what I did once. Lasted a week though (paper doesn't crash well, but looks awesome doing it.)

    0
    Madrias357
    Madrias357

    Reply 11 years ago on Introduction

    I know.  One of my friends lights paper planes on fire and throws them.

    0
    Madrias357
    Madrias357

    Reply 11 years ago on Introduction

    Wherever he wants, actually.  They land in pools, knock over drinks, land on glass tables, sail into other yards.  But, he usually follows them up with a bucket of water if they land somewhere where they can cause harm.  One managed to get away and landed in the river, though.

    0
    Colonel88
    Colonel88

    Reply 11 years ago on Introduction

    If you have the Vulcan,(nerf gun) or any other battery powered gun you can hook the motor up so it spins the gun left and right.Hook up the other motors wires to the trigger. And there, you have a radio-controlled weapon of mass destruction.