Mini SR-V1
Intro: Mini SR-V1
Many people didn't have enough pieces to make Killerk SR-V1, so i decided to make a Mini version of it.
STEP 1: The Handle
This handle is the same as the one from the real SR-V1. it is the same size too! just lokk at the real one to make it.
STEP 2: Bottom Part of the Gun
This is the bottom part of the gun, the stock is on the end of it. My Bottom piece is about 6 yellow pieces long as you can see in the picture. The stock is the same size as the original SR-V1 stock, same design too. this whole gun is just the original gun with less pieces.
STEP 3: The Barrel
This is also the same barrel as the origionail Barrel, but it just has less pieces. My barrel is about 8 yellow pieces long.
STEP 4: The Sight
This sight is the Same sight as from the original SR-V1, I just used different colored pieces. The sight has small modes of my own.
STEP 5: The Bipod
The bipod is optional, i made an istructable for it and it is called (SR-V1 Bipod Mod) you can make that one and then add it to your gun.
STEP 6: Putting It Together
Now we will put all of the steps together. The gun will conect together just like the real SR-V1
STEP 7: Finished Product
This is the Finished product. its only my second instructable, sorry if it is not very good or clear.
STEP 8: SR-V1Dart
This is the SR-V1 dart, you have to use tape to make the fins.
115 Comments
NYPA 14 years ago
Vynash 14 years ago
james4 14 years ago
PindaHoofd 14 years ago
muffinslayer2 14 years ago
Trisuniel 14 years ago
Trisuniel 14 years ago
Lowney 14 years ago
sbann5 14 years ago
jackster17 14 years ago
Raiden97 14 years ago
ColtonBlake 14 years ago
Onii 15 years ago
Bartboy 14 years ago
Onii 15 years ago
I_am_Canadian 15 years ago
J4mm3r5 15 years ago
smittina575 15 years ago
J4mm3r5 15 years ago
Namlem 15 years ago