Introduction: Miniature Gun Model
More by the author:
About: Way she works
Mini Gun Model made out of pine and a spent .22 magnum Brass.
Supplies needed
-.22 Magnum Brass Cartridge
- .5in x 1in x 4in Piece of White pine
- carving knive(s)
- various grits of sand paper
-some sort of glue, epoxy, cement
Supplies needed
-.22 Magnum Brass Cartridge
- .5in x 1in x 4in Piece of White pine
- carving knive(s)
- various grits of sand paper
-some sort of glue, epoxy, cement
Step 1: Gettin Started
Draw out your stock shape on the pine and begin carving it into a rough shape with a small sharp knife.
Step 2: Finishing Up
Finishmthe shaping sand the stock to the feeling you like and put some Varnish to make it even smoother. Glue the Cartridge onto the stock with a strong bonding epoxy or cement
