Moded Nerf Gun
Intro: Moded Nerf Gun
I am nor responsible for any injures
STEP 1: Tools Needed:
For this project you will need...
1 Philips head screw driver
1 Philips head screw driver
STEP 2: Parts Needed:
Two Nerf guns. I used the clear one with the laser but it should be close with other models
STEP 3: UN Screw.
Just unscrew the Nerf gun. TAKE A PICTURE SO YOU KNOW WHERE EVERYTHING GOES!
STEP 4: Barrel
If you get this gun(recomended) you will see a large barrel. Unscrew this.
STEP 5: Mod
Do the last few steps to both the guns. you will need to twist the springs together into one
STEP 6: Reassembly
reassemble