Introduction: Mosaic Toilet Tank Pot
Make sure you hop over to my Blue Velvet Chair blog if you like this project and want to see more interesting repurpose designs.
First up is my toilet tank repurpose/upcycle. I found her, abandoned in a pile of junk behind a home improvement store and down by the river. My husband's only comment as I unloaded her from the car was "Can't wait to see what you do with that", as he slightly shook his head back and forth - giving me just the right amount of support and disbelief at the same time. Motivating to show him what I can do with a junky toilet tank!
Why a toilet tank? Well...it has a lovely shape if you are thinking 'cool garden planter'. It's also waterproof, so no crazy sealing necessary. Why the plastic bottle? Because I've seen some fabulous plastic bottle projects in blogland lately and I thought 'why not?'.
Step 1: How to Begin
While the inside of the tank doesn't need any sealant, the outside did need a primer applied since the surface is smooth porcelain and the tile adhesive won't stick if you don't have a roughed up surface. And because I have no idea if you can sand a toilet tank (and the real reason is that I was too lazy to try), I applied a basic primer for tiling and let it dry for a couple of hours.
I had an idea of the sun and moon from Barcelona trip inspirations. So I started with the (easier) backside and sketched my moon. Look closely and you'll see a star sketch which doesn't make it to the final piece. Meanwhile, my kind husband mixed the tile adhesive for me according to instructions. You just have to gauge how much you'll need given the time you have available to work on your project - and hope for the best. Only mix portions you can use that day.
It's important to take sections at a time so that your tile adhesive doesn't dry out too much before you get tiles laid in place. My tiles were already broken (using the 'hammer tiles wrapped in towel' method), so now I was mainly using tile clippers to get smaller shapes. The tile pieces don't have to be perfect fits. In fact, I prefer they are a bit wicky wacky - adding to a lovely 'dirty mosaic' style. Tip: keep a plastic bag around your tile adhesive mix to keep it from drying out too quickly. Too-dry tile adhesive is one reason for tiles falling off when a project is completed - and believe me - when you invest time in mosaics you don't want that to happen!
Step 3: Using the Plastic Bottle in Mosiac
The plastic bottle? I sliced off the bottom and gave it a light spray of yellow paint on the inside. Then when that dried, did a light spray-by with orange.
Turn it over and the plastic gives it a nice 'colored glass' feeling. It will be perfect for the center of the sun on the front side of the mosaic planter.
Step 4: Get Tiles in Place
Now all the sun bits are in place with tile adhesive. You'll see that I mix colors - and different sizes and heights of tiles. Again...I like my mosaics 'dirty'. They are the 'rustic' version of mosaics - versus the clean modernist mosaics where everything is consistent and matchy-matchy. Nothing wrong with that...but I like mine eclectic.
Here's what your project will look like when you get all tiles into place. If you aren't used to working with mosaics, this is the point where you step back and say..."I spent all that time working on this monster? What was I thinking?" Be patient! The real beauty of mosaics doesn't reveal itself until you have finished the very last step! Let the piece sit at least 24 hours so that the tile adhesive dries properly.
Now it is time to start grouting. I love using a dark graphite gray grout in many of my pieces. It adds to that eclectic dirty mosaic feeling. I do plan, however, to experiment with more grout colors on some coming projects. Be prepared! this is when the project REALLY gets dirty! Literally! Push the grout back and forth over your piece to press it in the gaps between tiles - I use a small kitchen sponge.
Use gloves if you don't want to end up with bandaged hands - tile grout sucks out any moisture from your skin, leaving hands and fingers cracked and sore. It's time to get a bucket of water, wet the sponge, and start wiping away that grout. Wipe and dip (in water) and squeeze. It's good to keep using a healthy amount of water on your sponge when wiping because it helps prevent the tile grout from drying out too quick (which would cause cracking and breaking pieces later).
Keep wiping. I think this is after my 2nd or 3rd round of wiping. If anything, working with a mosaic is a lesson in patience. It will be ruined if you work too fast.
Once you get all the grout wiped off the tiles and pressed in between the gaps, you'll still have a piece that looks smutsy and dirty. Leave it! What is important is that you have gotten the main chunks and layers of grout off the tiles and that the gaps are filled. The 'film' of grout will still be there - and you will leave it like this for another 24 hours. I promise you...it may look 'wrong', but it will be 'oh so right' in the end.
Step 6: The Reveal
The next day, get out your rag (I like to use an old thick washcloth) and start wiping away that 'film' left on the tiles. You'll do this step with a dry rag - no more water. This is when your mosaic will begin to reveal herself and pop!
Now you can put your mosaic to work. This toilet tank is now a lovely flower pot in our remodel-in-progress front yard. It has the sun on the front side to greet our friends as they arrive.
When we have friends over for a visit, we hope they will sit and stay for a while (perhaps even sit in the blue velvet chair?). So I think it is only appropriate that they see the moon side of the planter as they are leaving our house in the evening after a good day of thoughtful conversation and laughs.
Participated in the
Green Living & Technology Challenge